SupaGate 4 Channel RF Receiver for 4 Doors and up to 99 Users

The SupaGate 4-Channel RF Receiver provides a compact and reliable access control system with RF technology for ease of installation and operation. The SupaGate works automatically and enables access control of doors (strike/electric/magnetic locks), vehicle gates and garage doors. A SupaGate RF Receiver access control system typically needs one receiver to control four access points and one transmitter for each person given access rights.

Working with the Impro (XQT/903) quad transmitter, it provides for stable, adjustment-free, automatic access control. Each transmitter can be added or deleted from the system simply by using the push buttons and display within the receiver. Access can be granted through any or all of the four relays therefore restricting access through certain doors, gates or barriers if necessary.

Features

• 4 relays, each with NO, COM and NC contacts
• 9 LED indicators, including two 7-segment display LED’s
• 4 internally accessible push buttons
• Compatible with Impro quad transmitter (XQT/903)
• Operates using a 12V power supply
• 12A at 28V DC or 120V AC, 6A at 250V AC
• CE approved
• Receiver operation - 433.92Mhz
• Up to 80m range depending on site conditions

SGI/901 SupaGate 4-Channel RF Receiver - 4 Doors, 99 Users

A SupaGate 4-Channel RF Receiver housed in a black, aluminium extruded cabinet. The SupaGate consists of a top cover, a base and two end plates (each end plate is attached with three thread cutter screws (M3 x 8mm). Also included is a 173mm (6.81”) antenna, four brass wood screws (3.5mm x 25mm), four wall plugs (7mm). Requires a weatherproof enclosure if installed externally. You will also need XQT/903 UHF hand-held 4 button transmitters (one per person with access rights).