| Coral 1050 Electro-Hydraulic Bollard |
 |
Designed to restrict vehicle access in both public and private areas, Coral 1050 has an operation time of 4 seconds and is 100mm in diameter, 510mm high with a weight of 86kg. Installation is easy with th e self-contained hydraulic pump and piston assembly with no special adjusting or calibration required. Manual override is allowed in the event of an emergency or power failure and there is also the option of an electro-valve and coupling, which automatically lowers the bollard in the event of a power failure. The electronic control unit allows the systems to be operated in either automatic or semi-automatic mode and are easily integrated with access control and safety equipment such as traffic lights, photocells and ground loops.
|
 |
| Coral 1080 Electro-Hydraulic Bollard |
 |
Designed to restrict vehicle access in both public and private areas, Coral 1080 has an operation time of 4 seconds and is 100mm in diameter, 810mm high with a weight of 104kg. Installation is easy with th e self-contained hydraulic pump and piston assembly with no special adjusting or calibration required. Manual override is allowed in the event of an emergency or power failure and there is also the option of an electro-valve and coupling, which automatically lowers the bollard in the event of a power failure. The electronic control unit allows the systems to be operated in either automatic or semi-automatic mode and are easily integrated with access control and safety equipment such as traffic lights, photocells and ground loops. |
| |
| Vigilo 2250 Electro-Hydraulic Bollard |
 |
Designed to restrict vehicle access in both public and private areas, Vigilo 2250 has an operation time of 4 seconds and is 200mm in diameter, 510mm high with a weight of 102kg. Installation is easy with th e self-contained hydraulic pump and piston assembly with no special adjusting or calibration required. Manual override is allowed in the event of an emergency or power failure and there is also the option of an electro-valve and coupling, which automatically lowers the bollard in the event of a power failure. The electronic control unit allows the systems to be operated in either automatic or semi-automatic mode and are easily integrated with access control and safety equipment such as traffic lights, photocells and ground loops.
|
| |
Vigilo 2280 Electro-Hydraulic Bollard |
 |
Designed to restrict vehicle access in both public and private areas, Vigilo 2280 has an operation time of 4 seconds and is 200mm in diameter, 810mm high with a weight of 131kg. Installation is easy with th e self-contained hydraulic pump and piston assembly with no special adjusting or calibration required. Manual override is allowed in the event of an emergency or power failure and there is also the option of an electro-valve and coupling, which automatically lowers the bollard in the event of a power failure. The electronic control unit allows the systems to be operated in either automatic or semi-automatic mode and are easily integrated with access control and safety equipment such as traffic lights, photocells and ground loops.
|
|
|
Coral and Vigilo Accessories |
| |
7054 |
Elpro 10 electronic control unit for use with both versions. The unit can be operated in automatic or semi-automatic mode and is designed to accept a plug in radio receiver card. Integral LEDs indicate faults detected. |
| 76 |
Electro-valve with couplings for automatic lowering in the case of a power failure. |
| 918/7054 - Strabuc 918 All-in-One Electro-Hydraulic Rising Bollard |
 |
Designed to keep traffic away from sensitive areas, the Strabuc 918 has built-in flashing lights during operation and a diameter of 275mm. The bollard comes as a one-piece assembly and needs only to be sunk into the ground and cabled back to the control board. No hydraulic pipe connections are required. The bollard extends to a height of 700mm with an operation time of just 6 seconds. One or more bollards can be installed and operated together or individually. |
| |
| 930.88/7054 - Strabuc 918 Armoured Electro-Hydraulic Rising Bollard |
 |
As 918/7054 Strabuc 918 but with a wall thickness of 12mm. This bollard provides protection to shop windows, warehouse units, car showrooms, banks and access where high security is provided. Comes with separate control unit. One or more bollards can be installed and operated together or individually. |
| |
|
| 209270/7054 - Strabuc 918 with Remote Air-Cooled Pump |
| |
Electro-hydraulic rising bollard for heavy use applications with a diameter of 275mm, a height of 700mm and a raise and lower time of 6 seconds. . The remote air cooled pump assembly enables a higher usage than all-in-one systems. The post is supplied with an air-cooled pump assembly, pump enclosure, and 3 x 6m flexible pipes. A 240V 10A supply is required at the pump assembly. The flexible hydraulic pipes are run between the Strabuc and the pump assembly. A separate electronic control board is included in the part number. One or more bollards can be installed and operated together or individually. |
|
| 209350/7054 - Strabuc 918 Armoured with Remote Air-Cooled Pump |
| |
As 209270/7054 Strabuc 918 with remote air-cooled pump but manufactured from 12mm reinforced steel. |
|
160 - Strama 500
|
 |
Fully retractable, manual bollard. Complete with ground fixing plate, 4 warning lights and 10m of cable. The rising piston has a square steel section of 200 x 200mm and height 500mm. The bollard assembly comes in a painted finish. |
| |
| 170 - Sibli |
 |
Removable, manual post. Core armoured stainless steel square post of section 120 x 120mm with rising height 780mm.The Sibli comes complete with stainless steel ground support and coded key. |
| |
| 180 - Sicu |
 |
Fixed bollard. Core armoured stainless steel square section post with ground fixing plate. Post section 120 x 120mm and height 730mm. A very sturdy post for all types of property protection. |
| |
RISING BOLLARDS 
